HSX Series Constant Temperature and Humidity Incubator
HSX series Constant temperature and humidity Incubator: It has high-precision equipment with cold, hot constant temperature and constant humidity control. It provides all kinds of environmental simulation conditions required for industrial research and biotechnology testing. Widely used in cell tissue culture, fungal spore culture, food and drug preservation experiments, plant seed germination, performance testing of wood building materials and other needs.
Features
Running design
Compressor working mode: the instrument can set the compressor to stop working temperature point and extend the service life of the compressor; the compressor can also set the normally open and intermittent working temperature points.
Defrost function: three-stage electric heating defrosting program control to ensure that frosting affects the temperature inside the box during
low-temperature operation of the equipment.
Large-screen LCD displays, real-time display of parameters, easy to operate, quick setting of temperature, humidity and time parameters.
Intelligent control: The intelligent temperature control system can set up to 100 cycles, and 30 bands continuously control temperature, humidity and running time.
Humidifier integrated design: intelligent control of humidification instrument, automatically control the start and stop of the humidifier according to the approved humidity requirements, to ensure the humidity inside the box is
stable.
Internal circulation system
The fan is made of high-quality fan and large impeller fan, which has higher ventilation efficiency and better temperature uniformity.
The circulatory system uses the back suction and the bottom vertical air supply
The diaphragm laser hollows out the round hole, the ventilation effect is better, and the temperature uniformity is better.
Special sheet metal processing
The box body is formed by laser cutting once, and the outer box body is made of anti-static spraying on the surface of high-quality cold-rolled steel sheet.
The whole stainless steel plate of the partition plate is formed by laser once, no solder joints, and the load-bearing beam is added at the bottom of the partition plate, and the bearing capacity is stronger.
The partition is detachable and can be adjusted up and down freely with a minimum spacing of 30mm.
The partition has a slide bayonet design, no dead angle, and convenient cleaning and maintenance.
The inner liner is made of high quality brushed stainless steel and has strong corrosion resistance.
Double-layer door design with built-in tempered glass door for observing objects in the workroom at a glance.
The door ring seal is sealed with a magnetic rubber strip, which is simple and convenient.
Humanized design
With Chinese and English menus available, it can meet different language requirements.
Temperature conversion at °C/°F is possible.
The tray position is adjusted freely.
Four-corner universal wheel with brake pads on the front wheels to prevent equipment from shaking.
Power-down memory function.
Security function
The equipment is equipped with a leakage protection device to ensure the safety of the operator and the safety of other equipment in the laboratory.
The system has a limited temperature control sound and light alarm system inside, which stops working beyond the limit temperature and automatically alarms when the sound and light exceeds the alarm temperature.
Self-diagnosis function: Display fault information to facilitate judgment of fault problems.
Waterproof stainless steel heating tube, corrosion resistant and long service life.
Refrigerant: Internationally recognized R134a environmentally friendly refrigerant, non-flammable, non-explosive, non-toxic, non-irritating, non-corrosive, with good safety performance.
Note: The performance parameters are tested under no-load conditions, ambient temperature 25 ° C, ambient humidity 55% RH.
| HSX series |
150 |
250 |
350 |
450 |
| Temperature range |
ºC |
4~60 |
| Temperature resolution |
ºC |
0.1 |
| Temperature fluctuation |
ºC |
±0.5 |
| Relative humidity range |
RH |
55%~95% |
| Humidity fluctuation |
RH |
±3% ~±5% |
| Material |
Internal: stainless steel; shell: cold rolled steel plate, plastic-sprayed surface; shelf: stainless steel |
| Standard shelf number |
Pc |
3 |
3 |
3 |
4 |
| Shelf weight |
kg |
10 |
| Internal dimension |
Width, mm |
500 |
550 |
550 |
700 |
| Depth, mm |
370 |
450 |
550 |
550 |
| Height, mm |
800 |
1050 |
1150 |
1200 |
| Volume |
L |
150 |
250 |
350 |
450 |
| Overall dimension |
Width, mm |
630 |
680 |
680 |
830 |
| Depth, mm |
570 |
650 |
670 |
770 |
| Height, mm |
1450 |
1700 |
1890 |
1900 |
| Packing dimension |
Width, mm |
760 |
800 |
810 |
910 |
| Depth, mm |
700 |
780 |
900 |
950 |
| Height, mm |
1620 |
1860 |
2050 |
2070 |
| Net weight |
Kg |
110 |
130 |
150 |
170 |
| Gross weight |
Kg |
130 |
160 |
170 |
190 |
| Package |
Non-fumigation wooden box |
| Voltage |
V/Hz |
220/50 |
| Power |
W |
730 |
770 |
810 |
1350 |
| Power line |
|
12 |
12 |
1.52 |
1.52 |
){kind=link}