| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Static Cone Penetrometer
Wheel type CPT vehicle (TPC-15W, TPC-20W)
Wheel type CPT vehicle uses hydraulic transmission system to penetrate, anchor, level and lift car body, etc.The hydraulic system's oil is supplied by a large fl ow and high-pressure gear pump with an advanced directioncontrolling combination multi-way valve which is installed in the console center. Each a hydraulic valve controls one circuit. On the right of multi-way valve, the relief valve is installed to control the oil pressure.The operation panel has two layers. The upper is the main control circuit while the lower is oil cylinder control circuit.On the upper layer there are three control rods: the left one to control penetration system; the middle one to control the anchor system; the right one to control the hydraulic props.The lower four rods is to control oil cylinder.
| Engine type | Diesel CZ2100 |
| Max speed | 40KM/h |
| Max force | 150kN, 200kN, 250kN |
| Drive | Diesel Engine, Electric starting |
| Oil pressure | 10 Mpa |
| Penetration speed: | 1.2±0.3m/min |
| Dimension(m) | 3.1×1.6×1.63 |
| Weight | 3000Kg |
| Model | Description | Unit | Qty |
| Operation part | |||
| TPCL-001A | Operation system | set | 1 |
| TPCL-001C Vehicle | Vehicle (20t) | nos | 1 |
| Penetration part | |||
| TPCL-002A | Penetration cylinder | set | 1 |
| TPCL-002B | Penetration rod(ø40) | nos | 50 |
| Anchoring part | |||
| TPCL-003A | Hydraulic anchor machine | set | 1 |
| TPCL-003B | Ground anchor | set | 6 |
| TPCL-003C | Anchor fi xing beam | nos | 2 |
| TPCL-003D | Wedge key on anchor tip | nos | 10 |
| TPCL-003E | U-shaped heave device | set | 1 |
| Test part | |||
| GME500 | Data acquisition system | set | 1 |
| TJC-1V | (optinal) Data acquisition system | set | 1 |
| Accessories | |||
| TPCL-004A | Fixing block | nos | 2 |
| TPCL-004B | Reducer union | nos | 1 |
| TPCL-004C | Guide sleeve(ø40) | set | 1 |
| TPCL-004D | Tool | set | 1 |
| TPCL-004E | Gasket | set | 1 |
| TPCL-004F | 8 core cable | m | 80 |
){kind=link}