Drag Type Cptu Static Cone Penetrometers (CPT) Machine

• After-sales Service: All Life
• Warranty: One Year
• Transport Package: Wooden Case
• Specification: 15ton
• Trademark: C-Tech
• Origin: China
• Model NO.: TPC-15T
• HS Code: 90248000
• Production Capacity: 50 Sets/Month

Product Description

Drag type CPT Machine (TPC-15T, TPC-20T)
                
It has two axles each of which assembles two tyres under the chassis. At each corner of the chassis, there is one mechanical support leg, namely total four legs, to lift the chassis.

Drag type CPT Machine is developed on the basis of the current domestic commonly used bulk hydraulic twocylinder static penetration testing machine, it absorbs the advantages of the structure of the bulk hydraulic static testing machine, light and flexible, easy to operate. With the advantage of large-scale static probe vehicles that can be easily transported over long distances, a trailermounted chassis is set up, and the dispersed components are arranged in an orderly manner, thereby reducing labor intensity and improving work efficiency. In addition to the conventional static penetrating test, it can also be subjected to tests such as flat scoop swell test, field cross-plate shear test, wave velocity test, hole pressure multi-function static probe and so on. test.
 

Model	TPC-15 T/TPC-20T
Max force	150kN, 200kN
Drive	Diesel Engine, Electric starting
Dimension(mm)	2800×1560×1500mm
Weight	2000Kg

              

Wheel type CPT vehicle uses hydraulic transmission system to penetrate, anchor, level and lift car body, etc. The hydraulic system's oil is supplied by a large flow and high-pressure gear pump with an advanced directioncontrolling combination multi-way valve which is installed in the console center. Each a hydraulic valve controls one circuit. On the right of multi-way valve, the relief valve is installed to control the oil pressure. 
Engine type: Diesel CZ2100
Max speed: 40KM/h
Max force: 150kN, 200kN, 250kN
Drive: Diesel Engine, Electric starting
Oil pressure: 10 Mpa
Penetration speed: 1.2±0.3m/min
Dimension(m): 3.1×1.6×1.63
Weight: 3000Kg

 

TPC-20L/TPC-25

Crawler type CPT vehicle shares the same working principle with other CPT machine. It uses Hydraulic transmission technology and uniformly pushes CPT cone attached with electric resistance strain chip to the soil. The electric resistance strain chip will transduce the resistance between the cone and the soil layer to electrical signal which will be transmitted to data acquisition system for reading, recording and confirming the mechanical parameters of foundation design.

Crawler type CPT vehicle shares the same working principle with other CPT machine. It uses Hydraulic transmission technology and uniformly pushes CPT cone attached with electric resistance strain chip to the soil. The electric resistance strain chip will transduce the resistance between the cone and the soil layer to electrical signal which will be transmitted to data acquisition system for reading, recording and confirming the mechanical parameters of foundation design.

Novel and compact design, small size with high power -- all in crawler type CPT vehicle the features of which are as set forth below:
1.By using this vehicle, operating CPT test in severe environment (such as beach, river bank, sand field, paddy field, etc) becomes so easy. Driving on icy roads also won't be a problem.
2.Advanced hydraulic system: with direction-controlling combination multi-way valve, it is compact, small and easy to install.
3.Unique hydraulic anchoring device: high-power motor directly runs the screw mandrel to anchor which is handy and time-saving.
4.Gliding rod case: while penetrating, it can be glided out effortlessly. This could enlarge the working space and make loading and unloading convenient. Also it can be pulled back easily while the vehicle's walking.
5.This vehicle is ideal not only for CPT test but also other in situ tests, with corresponding attachments and accessories, like CPTu test, PMT, DMT, VCT, WVT, etc.


 

TPC-3V
It is not only just the lightest CPT machine, but also vane shear test machine (i.e. VST). Its rated penetration force is 30KN (3t) and the test depth is up to 30m (in soft soil area). While doing CPT test, it could work with 10cm2 probe, also 10cm2 pore-pressure probe while doing CPTu test. This machine is manual operation, suitable for clay, silt, sand, etc. After over 20 years application and development, now it is improved to put up a perfect performance.

his machine is manual operation, suitable for clay, silt, sand, etc. After over 20 years application and development, now it is improved to put up a perfect performance.

Vane shear test ranges: 0 ~130KPa,
Cross Board To Board head configuration: 50×100 (mm) (general) or 75×150 (mm) 75×100 (mm) (special).

The data acquisition instrument and probesneed to be ordered separately.