| Customization: | Available |
|---|---|
| After-sales Service: | All Life |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Asphalt electric density gauge (EDG-A) is capable of providing accurate readings of asphalt density, moisture content, and percent compaction on asphalt typically used for roads and foundations.adopting no-nuclear technology,low cost,high effeciency and good security.It is one of the most advanced equipment to test asphalt density in the world.
FEATURES
New status bar feature, displays GPS status, data save status, available battery voltage, low battery status and date and time.
Measures density in common units (Kg./M3), and can measure the asphalt temperature.
New data management feature, you can store 4000 readings on the internal data logger, quickly access, download or delete your project data.
Ability to download files from the EDG-A via USB drive.
Light weight and easy to use, 24 hours of portable operation.
Fast, reliable, accurate and repeatable readings in real time, user friendly, cost effective.
Non-Nuclear means no badges, licenses or storage and transport concerns.
Features:
Packing List
1. One storage case
2. One edg-a unit
3. One battery charger: 220V/50hz
4. One usB data cable
5. user manual, warranty card, certificate
The density of asphalt pavement is directly proportional to the measured dielectric constant of the material. edg-a uses electrical waves to measure dielectric constant using an innovative, toroidal electrical sensing field established by the sensing plate. the electronics in the edg-a convert the field signals into material density readings and displays the results. Once calibrated, direct density readings can be consistently obtained. as shown below:
EDG-A can be used in three different measurement or run modes, respectively:
Single reading mode continuous reading mode
Average reading mode
Single reading time less than five (5) seconds.
Average averages five (5) readings and stores data including date and time.
stores thousands of records continuous instantaneous density readings. segregation identifies variations in material density associated with segregation.
Function
density % compaction integrated
temperature sensing real-time temperature display 0° c to 350°c
calibration Mode
normal correlation offset to cores
Mesurement specification
Sensing area 11 inch dia. base allows optimum measurement on fine and coarse material types.
Max Measurement depth 110mm
Measurement display density, % compaction, surface temperature, Mix name & project name
Mechanical Specification
shipping Weight w/ case 9.00kg
shipping dimensions 490 x 220 x 390 mm
Electrical Specification
Battery 2.5 amp-hr niMh, 12 V recharge time 4 hours
Battery charger 12V/1000ma universal ac charge
computer ports 1 USB port
Plastic and carton package
){kind=link}