TYJC-20 Portable Overhead Wire Catenary System, Wire Wear Measurement Device
Functions
The wear measurement device can measure the rigid catenary system contact line. The measuring head uses the ireless micro camera as the image acquisition key measuring part, the measuring head, wireless date receiver and one pc Ultrahigh voltage insulating rod assemble one full set measuring device .worker holds UHV insulating rod to push the measuring head touches each measurement point, full system uses Zigbee technology data to transmit measuring values wirelessly, wireless diagnostor collect the measuring date and to do date analysis and storage.the wireless diagnostor is used touch screen computer technology, operator may inputworking area mark like area No/Line NO /Pole No. The wear measurement device uses a special software to statistically analyze the contact line wear area data, and can exchange data through via USB port connect PC and print out the specified report specifications.
Main Technical Parameters
Measuring height: 1m ~ 6.5m;
Scope of application:
DIN48201standard
TJ10/16/25/35/50/70/95/120/150/185/240/300/400/500
DIN43138 Standard
TJR16/25/35/50/70/95/120/150/185/240/300
Measurement accuracy: 0.02mm;
Data transmission: Zigbee technology, data wireless transmission, ground receiving terminal synchronous display;
Display content: pillar number, wire wear width, wear percentage prompt;
Storage: applause computer (added) real-time storage;
Insulation performance: suitable for power frequency, single-phase (AT27.5 kV, BT25 kV) contact network live working;
portable: probe weight <1kg;
power: probe and receiver using lithium-ion batteries;
power consumption: can work continuously for 8 hours at room temperature;
working environment: -10 ° C ~ +50 ° C relative humidity 80%;
Audited Supplier 
){kind=link}
){kind=link}