Crawler type CPT Vehicle (TPC-20L/TPC-25L)
Crawler type CPT vehicle shares the same working principle with other CPT machine. It uses Hydraulic transmission technology and uniformly pushes CPT cone attached with electric resistance strain chip to the soil. The electric resistance strain chip will transduce the resistance between the cone and the soil layer to electrical signal which will be transmitted to data acquisition system for reading, recording and confirming the mechanical parameters of foundation design. Novel and compact design, small size with high power -- all in crawler type CPT vehicle the features of which are as set forth below: 1.By using this vehicle, operating CPT test in severe environment (such as beach, river bank, sand field, paddy field, etc) becomes so easy. Driving on icy roads also won't be a problem. 2.Advanced hydraulic system: with direction-controlling combination multi-way valve, it is compact, small and easy to install. 3.Unique hydraulic anchoring device: high-power motor directly runs the screw mandrel to anchor which is handy and time-saving. 4.Gliding rod case: while penetrating, it can be glided out effortlessly. This could enlarge the working space and make loading and unloading convenient. Also it can be pulled back easily while the vehicle's walking. 5.This vehicle is ideal not only for CPT test but also other in situ tests, with corresponding attachments and accessories, like CPTu test, PMT, DMT, VCT, WVT, etc.
Technical parameters:
| Model |
TPC-20L/TPC-25L |
| Engine |
490 diesel engine |
| Power |
22KW |
| Speed |
2.5-4.0 km/h |
| Drive |
Hydraulic motor |
| band |
Rubber or steel, 300mm wide |
| Pace |
82mm |
| Number of grip lug |
55 |
| Gradeability |
less than 20° |
| Oil pressure |
16MPa |
| Oil cylinder stoke |
450mm |
| Penetration force |
200KN, 250KN |
| Pulling force |
240kN, 280kN |
| Speed of penetration |
1.2 ± 0.3 m/min |
| Anchor motor |
M21-1.6T65 |
| Max. Torque |
2442 N.m |
| Multiple-threaded screw |
72x4x80 mm |
| Outline size (single-side anchor) |
3100x1560x1900 mm |
| Outline size (double-side anchor) |
3300x1560x1900 mm |
Audited Supplier 
){kind=link}
){kind=link}