Rectangular Wet Film Thickness Gauge Combed Shape
|FOB Price:||US $1.1-1.5 / Piece|
|Min. Order:||1,000 Pieces|
|Min. Order||FOB Price|
|1,000 Pieces||US $1.1-1.5/ Piece|
|Payment Terms:||T/T, Western Union, Paypal|
- Model NO.: WFR-A80
- Test Methods: Through Check Method
- Precision Gauge: 25-2000micron
- Shape: Rectangular
- Packing: Plastic Film and Carton Box
- Transport Package: Plastic Protective or Others
- Origin: China
- Type: Gauge Block
- Material: Aluminum Alloy
- Usage: For Inspection
- Customized: Customized
- Trademark: C-tech
- Specification: 1-80MIL
- HS Code: 90268000
Custom Color Matching Available.
1 Apply an initial coat of paint.
2 Hold the gauge at a 90-degree angle to the surface and press firmly. Both corners of the gauge must touch the substrate.
3 Remove the gauge and inspect the edge. The last notch with paint on the surface reflects the thickness of the paint. The number directly above the last painted notch is the thickness reading.
4 Clean the gauge with a clean rag immediately after reading. The gauge must be free of solvents, old paint or debris to give an accurate reading.
Tips & Warnings
Take all readings within 10 seconds of spraying. Paint solvent begins to evaporate as soon as it is applied. The longer you wait, the less accurate your reading.
Gauge readings will leave paint defects in paints with a high solid ratio. Painting a piece of scrap with the same surface characteristics as your project can give you a reasonably accurate reference.
The thickness gauge must be placed on a flat surface to give an accurate reading. When painting an irregular surface, turn the gauge as necessary to take your readings from a good reference point.
|Material||Stainless steel (WFR-S80)|
|Size||83 x 58 mm 2 approx.|
|Thickness||0.8 mm approx|
|4 Measuring ranges||1 to 6 Mil (25 to 152 Micro)|
7 to 12 Mil (178 to 305 Micro)
14 to 30 Mil (356 to 762 Micro)
35 to 80 Mil (889 to 2032 Micro)
|Scale indications||front Mil, rear Micro|